|
Finishing up the alternator swap.
This part was easier than I thought it would be.
1. Here is the original alternator. |
|
2. Removed from the brakcet, ready for the new alternator. |
3. The plugs on the new alternator are turned the wrong way, so I have to clock it. |
|
4. New and old for comparison. |
5. Here is what the case looks like with the cover off. |
|
6. Now, it is clocked correctly. |
7. Here are the old plugs. |
|
8. I opened up the harness to take out the old charge wires what I am not using anymore. |
9. Under the battery tray. |
|
10. This little wire is what used to carry all the power from the alternator. |
11. The new alternator in place. |
|
12. Under the battery tray with the harness wrapped back up. |
13. Not a great picture, but this is where the megafuse will be mounted. |
|
14. The new wiring hooked up to the alternator. |
15. Wire on left is from alternator, on right is out to the battery. |
|
16. Here is the 175 amp fuse. |
17. It all hooks up at the starter solenoid. |
All in all, not a hard upgrade.
|
