This will be another short update.

I tacked the motor mounts in place, and found out I didn't have the right material available for the transmission mount.

1. Here are the passenger side mounts. They are tacked into place for now.		2. From the front. They sit atop the frame rails.
3. Driver side mounts. I cut the back too short, so I had to re-make that one.		4. From the front. There will be some frame trimming, and also trimming of the motor mount itself.
5. Tacked in securely.		6. I need some u channel, or angle about 1 5/8 wide to make the crossmember out of.

© 2003 Brownie Davis All Rights Reserved