JUst a short update today.

I got around to bracing the cowl area, and cutting out the transmission tunnel.

1. Here is what I am going after today. Out comes the tunnel.		2. Here is the front of the tunnel, and the bracing.
3. Here is the back cut loose.		4. I had to fight it a bit, and use a rubber mallet, but the front is free.
5. The center area without the tunnel..		6. The rear tunnel exit. There will probably be a \__/ shape when all is done to clear the driveshaft.
7. There will likely be a transmission crossmember here when all is said and done.

© 2003 Brownie Davis All Rights Reserved