|
I picked up a jag rear end. I was going to get one from a junk yard, but they wanted to double charge me, so I found one on craigslist.
I had to clean it up and take it apart.
1. The car it came out of, where I got it. YOu can see it sitting there on the ground. |
|
2. Another shot. It took me a while to get out. |
3. The day I cleaned the rear up, I also cleaned up the front corvette suspension. |
|
4. A different view. |
5. Before I started. YOu can see the dust and dirt on it. |
|
6. From the back. You can see the exhaust pipes. I had to cut one to get it off. |
7. From the passenger side. |
|
8. One more. |
9. From the front. |
|
10. After a quick pressure wash. |
11. More after a fresh wash. |
|
12. The hub is aluminum color again. |
13. More freshly cleaned. Still has some grease on it. |
|
14. Just before taking it apart. |
15. The mounting bolts for the exhaust are out. |
|
16. Rubber mounts out. |
17. And the exhaust pipes out. |
|
18. Both pipes out, moving on. |
19. The springs are out. |
|
20. Here they are. |
21. And the other side. |
|
22. Now together. They are probably too heavy for the midget. I may run just one of the original, or two lighter ones. |
23. Central pivots coming out. |
|
24. Out. |
25. Front with pivots out. |
|
26. Here's the cage, removed. |
27. The rear without the cage. |
|
28. From the other side. |
It will cost a bit to rebuild it, and narrow things, but it will be worth it.
|
