Taking up the carpet (rubber matting, actually) in my white dodge. Need to see what the floors are like to see if I can use them to replace the rusted ones in the blue dodge.

1. Back closed. YOu can see a focus and a mini.		2. Inside the back, with everything in place.
3. With the back seat pivoted up.		4. Quite a mark the spare tire has left.
5. Driver's side with some trim removed.		6. Rear seat removed.
7. And the passenger seat up.		8. Back matting out, leaving the factory "sound deadening", aka cardboard sheet, in place.
9. Cardboard out.		10. Passenger seat out.
11. Driver's seat out.		12. Console out.
13. Belts out.		14. Front rubber mat out, showing sound deadening padding.
15. Driver's side. Shows some rust.		16. So does the driver side.
17. Everything out.		18. Floor strengthening plate under the flip up passenger seat.
19. Surface rust on the driver's side floor.		20. Rusty passenger side floor, with another shot of the strengthening plate.
21. More on the passenger side rust.		22. Clear view of both sides.
23. Lastly, bare but with seats back in.

Aside from fixing some stress cracks around mount holes, I'd say that the floor is in fine shape to be donated to the blue dodge..

© 2003 Brownie Davis All Rights Reserved